O-16.5mm(On30) かたばみ軌道 / Katabami Line


A2(420594mm)判のエンドレスループ1本のシンプルなレイアウトです。
  レイアウトのコンセプトは小さな島の産業用軌道といったところで,小型の産業用機関車に引かせた土運トロッコや人車の編成,小型モーターカーがのんびり走る風景を演出するためのものです.作業場のストラクチャを配置した前面と,草生した風景を演出する背面で構成されています.トンネルはつくらず,建物背後の盛り土と切り通しを使って風景を仕切った全方位レイアウトです,A1のアリアケセントラルとコンセプトは似ており,それをさらに凝縮したようなものになっています.
 このレイアウトに設置したストラクチャのうち二点は旧作です.小さな小屋と波板張りの機械工場はプラ板によるストラクチャー工作をはじめた頃の習作です。10年を経てやっと安住の地を得たというわけです.

Katabami Line is a A2(420mm x 594mm) size layout with a single loop with no sidings. In this small island, small leisure vehicles are used in road. Ford T inspection car is now waiting for ride to the cape. Small hut and workshop with corrugated sidings are my early work on steyrene sheet modeling.


Entire view of the layout.


レイアウト裏側の橋梁を渡るミルウォーキーの編成
Milwaukee locomotive crosses small trestle.


機械工場とその内装 
Machine shop was scratchbuilt from styrene sheets and rods. Work desk moldings come from Sierra West Blacksmith car kit.


2008/8/31 Nobuo Koizumi